A CFD analysis on improving lettuce canopy airflow distribution in a plant factory considering the crop resistance and LEDs heat dissipation

文献类型： 外文期刊

第一作者： Fang, Hui

作者： Fang, Hui;Li, Kun;Wu, Gang;Cheng, Ruifeng;Zhang, Yi;Yang, Qichang;Fang, Hui;Li, Kun;Wu, Gang;Cheng, Ruifeng;Zhang, Yi;Yang, Qichang

作者机构：

关键词： Airflow; Modelling; Porous medium; Tip burn

期刊名称：BIOSYSTEMS ENGINEERING （ 影响因子：4.123； 五年影响因子：4.508 ）

ISSN： 1537-5110

年卷期： 2020 年 200 卷

页码：

收录情况： SCI

摘要： In a plant factory, improper design of the indoor ventilation system may cause tip burn on lettuce plants due to the existence of stagnant air in the leaf boundary layer and low transpiration rates. In this study, three types of air ducts with different pore numbers and diameters were designed to generate a constant horizontal airflow on the surface of plant canopy. A three-dimensional computational fluid dynamics (CFD) model was established to analyse the airflow pattern on the crop canopy under different ventilation modes in a single cultivation bed. For this simulation model, the lettuce leaves were treated as a porous medium, and the drag coefficient (C-D) was assumed to be 0.02, which resulted in a permeability (K-p) and nonlinear momentum loss coefficient (C-F) of 0.02 and 0.134, respectively. The LED lamps were set as the energy source, and the heat released was calculated to be 297.5 kW m(-3). All the data above were validated. Three Designs with different pore numbers and diameters were simulated to predict the distribution of airflow. The design with 12 pores and 15 mm diameter was predicted to give the highest percentage of mean air velocity between 0.28 m s(-1) and 1.04 m s(-1) on the lettuce canopy surface, at 70.3%. This duct design is recommended as the best of the three Designs in this study. (C) 2020 IAgrE. Published by Elsevier Ltd. All rights reserved.

分类号：

  • 相关文献
作者其他论文 更多>>

微信小程序