Assessing the dynamic extrusion-based 3D printing process for power-law fluid using numerical simulation

文献类型： 外文期刊

第一作者： Liu, Qiannan

作者： Liu, Qiannan;Zhang, Nana;Wei, Wensong;Hu, Xiaojia;Tan, Yaoyao;Zhang, Liang;Liu, Qiannan;Zhang, Nana;Wei, Wensong;Hu, Xiaojia;Tan, Yaoyao;Yu, Yongming;Deng, Yamin;Zhang, Liang;Zhang, Hong;Bi, Chao

作者机构：

关键词： Food 3D printing; Rheological properties; Numerical simulation; Printing characteristics

期刊名称：JOURNAL OF FOOD ENGINEERING （ 影响因子：5.354； 五年影响因子：5.144 ）

ISSN： 0260-8774

年卷期： 2020 年 275 卷

页码：

收录情况： SCI

摘要： Numerical simulation was applied for the extrusion process in an extrusion-based food 3D printing. The rheological properties of the materials and their printing characteristics were also investigated. In this work, the distributions of velocity, local shear rate, viscosity and pressure of the materials during the extrusion process were calculated by the POLYFLOW software, and the relationship among the rheological properties, flow field distribution and printing characteristics of the materials had been described. The results showed that the pressure distribution in the flow field was directly proportional to the consistency index (K), and the pressure decreased with the increase of the flow behavior index (n), but not linearly proportional to the n. When the potato granules were added, the K value of the material increased, the n value decreased, the viscosity and pressure levels in the flow field increased, and the printing of the products deteriorated. When temperature was elevated, the K value of the material decreased, the n value remained constant initially but increased later, the viscosity level in the flow field decreased, the pressure level decreased initially and then increased slightly, the printing process became smoother, and the accuracy of the printed product enhanced. For the experimental 3D printer, the Power-law fluid had better printing characteristics when the K value was between 1000 Pa.s(n) and 1800 Pa.s(n) and the n value was between 0.15 and 0.3.

分类号：

  • 相关文献
作者其他论文 更多>>

微信小程序