Design and Experiment with a Double-Roller Sweet Potato Vine Harvester

文献类型： 外文期刊

第一作者： Mu, Guizhi

作者： Mu, Guizhi;Wang, Wanshuai;Zhang, Tingting;Zheng, Wenxiu;Zhang, Wanzhi;Mu, Guizhi;Zhang, Tingting;Zheng, Wenxiu;Hu, Lianglong;Zhang, Wanzhi

作者机构：

关键词： agricultural machinery; sweet potato vine; discrete element; harvester

期刊名称：AGRICULTURE-BASEL （ 影响因子：3.408； 五年影响因子：3.459 ）

ISSN：

年卷期： 2022 年 12 卷 10 期

页码：

收录情况： SCI

摘要： The yield of sweet potato vines is large, making it a good source of food. However, it is difficult to harvest sweet potato vines due to creeping and intertwining. Therefore, according to the domestic sweet potato planting model, this paper designed a double roll sweet potato vine harvester which can complete the operations of vine picking, vine killing, conveying and header harvesting at one time. The machine adopts the process of front roll vine picking, rear roll vine killing and rod bar lifting. The key components of the vine picking device, vine killing device and lifting device were designed and calculated. A numerical simulation test of the vine harvesting process was carried out by using the discrete element numerical simulation method. It was determined that the length of the vine picking rod from the outside to the inside is 175 mm, 150 mm and 105 mm, respectively, and the inclination angle of the end is 160 degrees. There are six vine killing knives on each vine killing knife plate. The inclination of the lifting device is 50 degrees and the conveying speed is 3 m/s. Using the box Behnken experimental design method, taking the vine picking roller speed, vine killing roller speed and ground clearance as the experimental factors, and taking the sweet potato vine harvest rate, stubble height and potato injury rate as the evaluation indexes, a quadratic regression orthogonal test was carried out, the effects of various factors on the evaluation indexes were analyzed, and the experimental factors were optimized and verified. The experimental results showed that the optimal parameter combination is as follows: the rotation speed of vine picking roller should be 716 r/min, the rotation speed of vine killing roller should be 1960 r/min and the ground clearance should be 16 mm. With these parameters, the harvest rate of sweet potato vines is 93.1%, the stubble height is 29.5 mm and the potato injury rate is 0.174%. As such, the harvester meets the requirements for the mechanized harvesting of sweet potato vines and is of great significance as a light and simplified product for the sweet potato industry.

分类号：

  • 相关文献
作者其他论文 更多>>

微信小程序