您好，欢迎访问北京市农林科学院 机构知识库！
北京市农林科学院机构知识库

全部

  • 全部
  • 标题
  • 学者
  • 机构
  • 关键词

Compensation control strategy for the cutting frequency of the cutterbar of a combine harvester

文献类型： 外文期刊

作者： Yin, Yanxin 1 ; Qin, Wuchang 1 ; Zhang, Yawei 3 ; Chen, Liping 1 ; Wen, Jingqian 4 ; Zhao, Chunjiang 1 ; Meng, Zhijun; 1 ;

作者机构： 1.Beijing Acad Agr & Forestry Sci, Beijing Res Ctr Intelligent Equipment Agr, Beijing 100097, Peoples R China

2.China Natl Res Ctr Intelligent Equipment Agr, Beijing 100097, Peoples R China

3.China Agr Univ, Coll Engn, Beijing 10083, Peoples R China

4.Beijing Inst Technol, Sch Mech Engn, Beijing 10081, Peoples R China

关键词： Combine harvestor; cutterbar; cutting frequency; compensation control strategy; cutting energy

期刊名称：BIOSYSTEMS ENGINEERING （ 影响因子：3.215； 五年影响因子：3.417 ）

ISSN： 1537-5110

年卷期： 2021 年 204 卷

页码：

收录情况： SCI

摘要： For grain combine harversters the correlation between cutting frequency and forward speed is typically based on the theoretical matching value of the cutting pattern. However, in reality cutting frequency is affected by cutting resistance which strongly linked to the physical and mechanical characteristics of the crop stems. Consequently, the field cutting frequency is usually lower the standard setting, resulting in the possibility of increasing losses during harvesting. An optimal cutting frequency model was built firstly based on the cutting pattern but the influencing factors on cutting frequency was analysed, and then a relationship model between cutting energy and cutting frequency was built. A regression model of the influence of wheat stem moisture content and cutting section area on cutting frequency was established by wheat stem cutting experiments. Thus, a cutting frequency compensation control strategy was proposed. To verify the effectiveness of the control strategy, field tests were carried out on uniformly growing wheat fields. The results showed that at the forward speeds of 1 m s(-1) and 1.5 m s(-1), the maximum deviation between the cutting frequency determined by this proposed approach and the optimal cutting frequency were 0.47 Hz and 1.1 Hz, respectively. Comparing performance without this compensation model, the maximum deviation of the cutting frequency without compensation decreased by 28.33% and 24.60%, respectively. The results indicated that with the proposed approach, the maximum deviation between the field cutting frequency and the predicted optimal cutting frequency could be significantly decreased and the cutting performance of the combine harvester could be observably improved. (C) 2021 IAgrE. Published by Elsevier Ltd. All rights reserved.

  • 相关文献
作者其他论文 更多>>
置顶
购物车
反馈

© 京ICP备09089781号-29 主办单位：北京市农林科学院

学术资源： 中国农业科学院 农业专业知识服务系统 农科联盟资源共建共享平台 中国农业科技文献与信息服务平台 中国农业期刊集成服务平台