文献类型： 外文期刊
作者： Chen, Jing 1 ; Zhong, Jieping 2 ; Li, Sidong 2 ; Wang, Bingbing 3 ; Pan, Rongkan 1 ; Gao, Lijun 1 ;
作者机构： 1.Lingnan Normal Univ, Dev Ctr New Mat Engn & Technol Univ Guangdong, Chem & Chem Engn Sch, Zhanjiang, Peoples R China
2.Guangdong Ocean Univ, Inst Sci, Zhanjiang 524048, Peoples R China
3.Chinese Acad Trop Agr Sci, Agr Prod Proc Res Inst, Agr Minist Key Lab Nat Rubber Proc, Zhanjiang 524001, Peoples R China
期刊名称：POLYMER ENGINEERING AND SCIENCE （ 影响因子：2.428； 五年影响因子：2.276 ）
ISSN： 0032-3888
年卷期： 2018 年 58 卷 7 期
页码：
收录情况： SCI
摘要： Siliceous earth (SE), which has a special morphology and structure, was selected as filler of natural rubber (NR) and mechanical properties of compounds were analyzed. Two processes were employed to prepare SE/NR compounds described as mechanical mixing method and latex method, respectively. Cure characteristics, mechanical properties of the vulcanizates prepared from the masterbatches were compared with those prepared by mechanical mixing method. X-ray diffraction results of NR/SE vulcanizations indicated that mechanical mixing above the latex process facilitated the intercalation of NR into the galleries of SE. The results of mechanical properties show that SE has good reinforcing properties on NR both by latex or mechanical mixing process. By comparison, H samples show slightly higher crosslink density, tensile strength, 300% modulus, and lower elongation at break than M sample in same loading. But in the aspect of dynamic properties there exist obviously difference between latex and mechanical mixing process. Rubber processing analyzer (RPA) results showed that uncured M samples showed obviously higher storage modulus than that of H samples. The heat build-up of M30 is much lower than that of H30. These behaviors indicated better dynamitic properties when the masterbatches prepared by the predispersing method was utilized. POLYM. ENG. SCI., 58:1043-1052, 2018. (c) 2017 Society of Plastics Engineers
- 相关文献
作者其他论文 更多>>
-
The influence of MoS2/carbon dots hybrid particles on mechanical properties of natural rubber latex
作者：Kang, Jiawei;Chen, Jing;Lin, Yianhong;Zhang, Liying;Yang, Hongyan;Liao, Lusheng;Zhang, Fuquan
关键词：Natural rubber; Molybdenum disulfide; Carbon dots; Mechanical properties
-
The mechanical and heat aging properties of natural rubber latex modified by carbon nanodots
作者：Chen, Jing;Gao, Tianming;Yang, Zinuo;Ma, Yukun;Lin, Qiuxin;Lin, Yijiao;Xue, Mingyue;Liao, Lusheng;Zhang, Fuquan;Liao, Lusheng
关键词：carbon nanodots; heat-aging resistance; mechanical properties; natural rubber latex
-
The mechanical and thermal properties of natural rubber/zinc methacrylate composites by latex compounding techniques
作者：Chen, Jing;Hu, Siwen;Huang, JiaYing;Shen, Shuyun;He, Dongning;Xue, Mingyue;Liao, Lusheng;Zhang, Fuquan;Liao, Lusheng
关键词：grafted; mechanical properties; natural rubber; zinc methacrylate
-
Photothermal Ti2O3/polyurethane/polyacrylamide foam with high solar-evaporation efficiency
作者：Li, Lefan;Hu, Zhang;Wang, Di;Li, Sidong;Li, Chengpeng;Zhao, Pengfei;Wang, Zhifen;Zhang, Yucang
关键词：Photothermal material; Solar desalination; Dititanium trioxide; Liquified chitin
-
An improved Deeplab V3+network based coconut CT image segmentation method
作者：Liu, Qianfan;Zhang, Yu;Chen, Jing;Lin, Shenghuang;Sun, Chengxu;Huang, Mengxing;Che, Mingwei;Li, Chun
关键词：coconut; CT images; semantic segmentation; DASPP; CBAM; RRM
-
Morphology and Microwave-Absorbing Performances of Rubber Blends with Multi-Walled Carbon Nanotubes and Molybdenum Disulfide
作者：Huang, Le;Chen, Jingru;Liu, Bingjun;Deng, Jing;Zhao, Yanfang;Zhao, Pengfei;Liao, Lusheng;Tao, Jinlong;Wang, Yueqiong;Wang, Bingbing;Liao, Lusheng
关键词：molybdenum disulfide; multi-walled carbon nanotubes; natural rubber; nitrile butadiene rubber; electromagnetic loss
-
Visualization and quantification of coconut using advanced computed tomography postprocessing technology
作者：Lin, Shenghuang;Hu, Jinyue;Chen, Jing;Zhang, Yu;Luo, Li'an;Huang, Mengxing;Cao, Hongxing;Sun, Chengxu
关键词：
