您好，欢迎访问北京市农林科学院 机构知识库！
北京市农林科学院机构知识库

全部

  • 全部
  • 标题
  • 学者
  • 机构
  • 关键词

Design and Experiment of Automatic Clip-Feeding Mechanism for Vegetable-Grafting Robot

文献类型： 外文期刊

作者： Jiang, Kai 1 ; Guo, Wenzhong 1 ; Chen, Liping 1 ; Huang, Wenqian 1 ; Ge, Yiyuan 3 ; Wei, Xiaoming 1 ;

作者机构： 1.Beijing Acad Agr & Forestry Sci, Res Ctr Intelligent Equipment, Beijing 100097, Peoples R China

2.Natl Engn Res Ctr Intelligent Equipment Agr NERCI, Beijing 100097, Peoples R China

3.Jiamusi Univ, Coll Mech & Engn, Jiamusi 154007, Peoples R China

关键词： grafting robot; grafting clip; automatic clip-feeding mechanism; ABAQUS; design

期刊名称：AGRICULTURE-BASEL （ 影响因子：3.408； 五年影响因子：3.459 ）

ISSN：

年卷期： 2022 年 12 卷 3 期

页码：

收录情况： SCI

摘要： Aiming to solve the problems of poor performance and low stability in the automatic clip-feeding of a grafting machine, an automatic clip-feeding mechanism with a precise single-clip discharge mechanism was designed, and a clip-feeding performance test was carried out. Taking the grafting clip of the 2TJGQ-800 type of vegetable-grafting robot as the research object, the clamping-force analysis model of the grafting clip was constructed by ABUQUS finite-element analysis software, and the variation law of clamping force, steel wire diameter, and opening deformation, as well as the calculation equation of clamping force, were obtained. The grafting clip model was verified by mechanical test, and test results showed that the grafting clip with a steel wire diameter of 0.7 mm proved safe and reliable for grafted cucumber and watermelon seedlings; the grafting clip with steel wire diameter of 0.8 mm had a risk of producing injury to grafted cucumber and watermelon seedlings when clamping. The method of single-clip discharge in the inclined discharging slideway was put forward, and the components for clip discharge and clip pushing were designed. The critical thrust for sending out the grafting clip in the clip-feeding slideway was 0.603 N after analyzing the force status of the grafting clip in the clip-feeding slideway. Test results showed that the success rate of automatic clip-feeding reached 98.67% when inclination angle of row-discharging slideway was 50 degrees and the thrust of clip-pushing cylinder (input air pressure of 0.4 MPa) was 8.04 N, which met the technical requirements of mechanical grafting. The inclination of the grafting clip and the damaged clip in the feeding slideway is the main reason for the failure of clip-feeding. The research results can provide theoretical and design references for the innovative research of the automatic clip-feeding mechanism of grafting robots.

  • 相关文献
作者其他论文 更多>>
置顶
购物车
反馈

© 京ICP备09089781号-29 主办单位：北京市农林科学院

学术资源： 中国农业科学院 农业专业知识服务系统 农科联盟资源共建共享平台 中国农业科技文献与信息服务平台 中国农业期刊集成服务平台