Extraction of Ramie Fiber in Alkali Hydrogen Peroxide System Supported by Controlled-release Alkali Source

文献类型： 外文期刊

第一作者： Meng, Chaoran

作者： Meng, Chaoran;Li, Zhaoling;Yu, Chongwen;Bi, Xuerong;Wang, Siyi;Wang, Chaoyun;Yu, Chongwen

作者机构：

关键词： Chemistry; Issue 132; Ramie fiber; oxidation degumming; sustained-release alkali source; Mg(OH)(2); tensile property; pH of degumming solution; COD value

期刊名称：JOVE-JOURNAL OF VISUALIZED EXPERIMENTS （ 影响因子：1.355； 五年影响因子：1.696 ）

ISSN： 1940-087X

年卷期： 2018 年 132 期

页码：

收录情况： SCI

摘要： This protocol demonstrates a method for ramie fiber extraction by scouring raw ramie in an alkali hydrogen peroxide system supported by a controlled-release alkali source. The fiber extracted from ramie is a type of textile material of great importance. In previous studies, ramie fiber was extracted in an alkali hydrogen peroxide system supported only by sodium hydroxide. However, due to the strong alkalinity of sodium hydroxide, the oxidation reaction speed of hydrogen peroxide was difficult to control and thus resulted in great damage to the treated fiber. In this protocol, a controlled-release alkali source, which is composed of sodium hydroxide and magnesium hydroxide, is used to provide an alkali condition and buffer the pH value of the alkali hydrogen peroxidesystem. The substitution rate of magnesium hydroxide can adjust the pH value of the hydrogen peroxide system and has great influence on the fiber properties. The pH value and oxidation-reduction potential (ORP) value, which represents the oxidation ability of alkali hydrogen peroxide system, were monitored using a pH meter and ORP meter, respectively. The residual hydrogen peroxide content in the alkali hydrogen peroxide system during the extraction process and the chemical oxygen demand (COD) value of wastewater after fiber extraction are tested by KMnO4 titration method. The yield of fiber is measured using a precision electronic balance, and residual gums of fiber are tested by a chemical analysis method. The polymerization degree (PD value) of fiber is tested by an intrinsic viscosity method using the Ubbelohde viscometer. The tensile property of fiber, including tenacity, elongation, and rupture, is measured using a fiber strength instrument. Fourier transform infrared spectroscopy and X-ray diffraction are used to characterize the functional groups and crystal property of fiber. This protocol proves that the controlled-release alkali source can improve the properties of the fiber extracted in an alkali hydrogen peroxide system.

分类号：

  • 相关文献
作者其他论文 更多>>

微信小程序