The thermal improvement of cascade phase change thermal management module for photovoltaic cells
文献类型: 外文期刊
作者: Wu, Tingting 1 ; Mo, Lianjian 1 ; Hu, Yanxin 1 ; Fan, Changxiang 2 ; Zeng, Mingjiang 1 ; Cai, Shuting 1 ; Song, Mengjie 3 ;
作者机构: 1.Guangdong Univ Technol, Guangzhou 510006, Peoples R China
2.Guangdong Acad Agr Sci IFA GDAAS, Inst Facil Agr, Guangzhou 510640, Peoples R China
3.Beijing Inst Technol, Sch Mech Engn, Dept Energy & Power Engn, Beijing 100081, Peoples R China
关键词: High thermal conductivity flexible phase; change material (SCPCM); Cascade phase change; Photovoltaic cell; Thermal management
期刊名称:APPLIED THERMAL ENGINEERING ( 影响因子:6.9; 五年影响因子:6.6 )
ISSN: 1359-4311
年卷期: 2025 年 273 卷
页码:
收录情况: SCI
摘要: Most existing phase change thermal management technologies are uniformly filled phase change modules, resulting in a certain degree of suppression of their phase change heat absorption rate, which seriously hampers the development and application of phase change material (PCM) in thermal management systems for photovoltaic cells. In this regard, a cascade phase change thermal management module for photovoltaic cells was proposed, where paraffin (PA) was used as the phase change matrix, polyethylene octene co-elastomers (POE) and ethylene-ethylene-butadiene-styrene block copolymers (SEBS) were employed as flexible support materials, and expansion graphite (EG) and carbon nanotubes (CNTs) were utilized as thermally conductive reinforcing materials to synergistically improve the thermal conductivity of the materials, resulting in the preparation of a highly thermally conductive flexible phase change material (SCPCM). The experimental results showed that the maximum thermal conductivity of SCPCM was 1.217 W/(m & sdot;K) at a mass fraction of 4 % of EG and 1 % of CNTs, and its latent heat of phase change was 150 J/g. It was also flexible and able to meet the thermal management requirements of photovoltaic cells. In addition, under the simulated sensible heat power of 2000 W/m2 irradiation intensity, after coupling a 10 mm phase change layer, the phase change layer of the cascade structure had the most excellent cooling effect, and the maximum temperature was reduced by 4.4 degrees C.
- 相关文献
作者其他论文 更多>>
-
Boiling enhancement on the thermally induced deformation surfaces
作者:Yan, Yibo;Zheng, Weijia;Xie, Ling;Hu, Yanxin;Wu, Tingting;Fan, Changxiang
关键词:Pool boiling; Shape memory alloys; Heat transfer; Bubble behaviors; Adaptive control
-
Task allocation and scheduling to enhance human-robot collaboration in production line by synergizing efficiency and fatigue
作者:Zeng, Fan;Wang, Yusheng;Ota, Jun;Fan, Changxiang;Shirafuji, Shouhei;Nishio, Masahiro
关键词:Human-robot collaboration; Task allocation and scheduling; Human fatigue; Production line
-
A non-associated constitutive model based on yld2004-18p yield criterion and its applications on sheet metal forming analysis
作者:Fan, Changxiang;Xu, Sai;Qiu, Guangjun;Liang, Xin;Wang, Honghao;Wang, Honghao;Yoshimura, Akira;Yanagimoto, Jun
关键词:Anisotropy; Non-associated flow rule; Constitutive model; Sheet metal forming; Finite element analysis
-
Perovskite solar module-thermoelectric generator tandem system with high power output
作者:Mo, Lianjian;Hu, Yanxin;Wu, Tingting;Liu, Guangli;Fan, Changxiang;Song, Mengjie
关键词:Perovskite solar module; Multi-stage thermoelectric generator; Electrical energy output; Full spectrum utilisation; Solar energy
-
The indication reading recognition method of pointer-type pressure gauge based on image processing
作者:Fan, Changxiang;Xu, Sai;Qiu, Guangjun;Guan, Dongde;Guan, Dongde;Guo, Jing;Shirafuji, Shouhei;Ota, Jun
关键词:pointer-type pressure gauge; reading recognition; scale recognition; pointer recognition; image processing
-
Thermal management of photovoltaic systems using cascade phase change material module
作者:Wu, Tingting;Mo, Lianjian;Ye, Guiyang;Hu, Yanxin;Zeng, Mingjiang;Cai, Shuting;Fan, Changxiang;Song, Mengjie
关键词:Cascade phase change module; Heat production analysis; Concentrating photovoltaic; Thermal management; Shape-stable composite phase change materials; (SCPCM)
-
Multi-mode pusher method and experiment based on information fusion
作者:Zhang, Qin;Shi, Yangfan;Ren, Hailin;Fan, Changxiang
关键词:Multi-mode; robot; feed delivery method; dairy cow feeding; information fusion



