您好，欢迎访问新疆农业科学院 机构知识库！
新疆农业科学院机构知识库

全部

  • 全部
  • 标题
  • 学者
  • 机构
  • 关键词

Performance test and process parameter optimization of 9FF type square bale straw crusher

文献类型： 外文期刊

作者： Zhang, Jie 1 ; Feng, Bin 2 ; Guo, Lei 2 ; Kong, Lingzhuo 2 ; Zhao, Chao 2 ; Yu, Xiuzhen 2 ; Luo, Wenjie 2 ; Kan, Za 1 ;

作者机构： 1.Shihezi Univ, Sch Mech & Elect Engn, Shihezi 832000, Xinjiang, Peoples R China

2.Xinjiang Acad Agr Sci, Res Inst Agr Mechanizat, Urumqi 830091, Peoples R China

关键词： square bale; straw crusher; crushing; working parameter optimization; performance test

期刊名称：INTERNATIONAL JOURNAL OF AGRICULTURAL AND BIOLOGICAL ENGINEERING （ 影响因子：2.032； 五年影响因子：2.137 ）

ISSN： 1934-6344

年卷期： 2021 年 14 卷 3 期

页码：

收录情况： SCI

摘要： In order to solve the problem of low productivity, unqualified segment length and high energy consumption during the process of crushing square bale straw caused by improper operation parameters, a 9FF square bale straw crusher was developed. In this study, by taking maize straw as the test material, the feeding speed, spindle speed of the crushing device and the state of the crushing device were taken as influence factors, and standard straw length rate, productivity per net working hour (hereinafter referred to as NWH) and energy consumption per ton of product as test indicators, the influence of the factors on the indicators were studied, and tests were carried out on the process of square bale straw crushing. By adopting the single factor test on the effect of the feeding speed, the spindle speed of the crushing device and the state of the crushing device on the test indicators, the suitable range of each factor was determined, respectively. Using the orthogonal test method, range method, variance method and comprehensive balance method, the experiment analyzed the significance of the influence of the three factors on various indicators and the order of priority. The test results showed that: the feeding speed was 5 m/min, spindle speed was 3000 r/min, and the state of the crushing device was a mixing cutter hammer, which was the best parameter combination (A(1)B(1)C(1)) for the processing technology of the square bale forage crusher. The standard straw length rate was 93.7%, and the productivity per NWH was 2.80 t/h, with energy consumption per ton of 4.72 kW.h/t, in which the standard straw length rate and productivity per NWH reached optimal values, and the energy consumption per ton of product was slightly higher than the optimal value in the experiment. The research results can provide a reference for the optimal design of the special crusher for square bale straw.

  • 相关文献
作者其他论文 更多>>
置顶
购物车
反馈

© 京ICP备09089781号-29 主办单位：新疆农业科学院

学术资源： 中国农业科学院 农业专业知识服务系统 农科联盟资源共建共享平台 中国农业科技文献与信息服务平台 中国农业期刊集成服务平台