Fast and precise DEM parameter calibration for Cucurbita ficifolia seeds

文献类型： 外文期刊

第一作者： Ding, Xinting

作者： Ding, Xinting;Wang, Binbin;He, Zhi;Shi, Yinggang;Li, Kai;Cui, Yongjie;Ding, Xinting;Yang, Qichang;Ding, Xinting;He, Zhi;Shi, Yinggang;Li, Kai;Cui, Yongjie;Cui, Yongjie;Cui, Yongjie

作者机构：

关键词： Cucurbita ficifolia seeds; 3D model reconstruction; Discrete element method; Parameters calibration; Genetic algorithm

期刊名称：BIOSYSTEMS ENGINEERING （ 影响因子：5.1； 五年影响因子：5.5 ）

ISSN： 1537-5110

年卷期： 2023 年 236 卷

页码：

收录情况： SCI

摘要： The lack of discrete element method (DEM) models and calibration parameters for Cucurbita ficifolia seeds, as well as low accuracy and efficiency of common parameters calibration methods, hinder the application of DEM for computer simulation in air-suction directional seeding equipment. In this study, the DEM parameters of the seeds were calibrated. The angle of repose (AOR), intrinsic parameters, and partial contact parameters of the seeds were experimentally measured. The seed 3D models were reconstructed based on the three-view profile information. The parameters and their value ranges were filtered through the Plackett-Burman design and steepest ascent test. The response surface method (RSM) and machine learning were utilised for optimisation inversion of the parameters. The experiments showed that the geometric relative error of the seed model was 0.69-6.54%, which meets the modelling requirements for DEM. The seed-seed static friction coefficient, the seed-seed and the seed-PVC rolling friction coefficient were 0.341, 0.026, and 0.059, respectively, which were obtained by inverting the GA-BP regression model via the Genetic Algorithm. The simulated AOR was 26.64 degrees, with a relative error compared to the actual AOR of 1.64%, which was better than the simulated AOR obtained by RSM optimisation. The greater the smoothing value setting in EDEM software, the less the particle filling, resulting in improved simulation efficiency but reduced model accuracy. The CPU + GPU(CUDA) solver showed high DEM solution efficiency. The results reveal that the method can be used to quickly and accurately construct a 3D model of the seed, and the parameter optimisation accuracy of GA-BP-GA is better than that of RSM.

分类号：

  • 相关文献
作者其他论文 更多>>

微信小程序