Mechanism of Molded Fiber Products in Plastic Strain and the Construction of a Model of Moisture Content

文献类型： 外文期刊

第一作者： Fu, Zhiqiang

作者： Fu, Zhiqiang;Wang, Hongsong;Zhao, Tong;Huang, Liqiang;Liu, Hesong;Duan, Liying;Zhao, Zhiyong;Jia, Xiaoyu

作者机构：

关键词： computational materials design; geometric linear mapping method; mechanical properties; modeling and simulation; moisture content; mold fiber products

期刊名称：JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE （ 影响因子：2.0； 五年影响因子：2.3 ）

ISSN： 1059-9495

年卷期： 2025 年

页码：

收录情况： SCI

摘要： The change in moisture content (MC) will lead to a change in the mechanical properties of molded fiber products (MFP). Therefore, for predicting the mechanical properties of MFP, it is necessary to construct a mechanical constitutive model with the MC term. In this study, quasi-static uniaxial tensile tests of sugarcane bagasse-molded fiber products (SBMFP) were conducted at different MCs (0 similar to 17%), and the stress-strain curves were obtained. The maximum failure strength of SBMFP was achieved at 6% MC. The phenomenon of MFP, the fiber moisture swelling-induced damage, was observed by SEM of the mesoscopic fiber structure of SBMFP. To accurately predict the SBMFP's mechanical properties at different MCs, based on the test results, a plastic constitutive model containing the MC term of SBMFP was constructed using the Geometric Linear Mapping method. Based on the constitutive model, the tensile process was simulated in Abaqus. The maximum error between the simulation results and the test data was 5.91%. The influence mechanism and the new constitutive model were validated by wheat straw-molded fiber products (WSMFP) and waste paper-molded fiber products (WPMFP). This study provides theoretical support for predicting the mechanical properties of fiber products.

分类号：

  • 相关文献
作者其他论文 更多>>

微信小程序